Artikelbeschreibung
Seit dem 02.03.2020 im Sortiment
Mit einer TDP von 190 W wird der Shadow Rock 3 auch anspruchsvollen Anwenderinnen und Anwendern gerecht. be quiet!® setzt auf die fortschrittliche HDT-Technologie, bei der die Hitze der CPU direkt von fünf vernickelten Hochleistungs-Heatpipes aufgenommen wird. Die schnelle Wärmeabfuhr sorgt für kühle Temperaturen in jedem System.
Trotz der grandiosen Kühlleistung ist der be quiet!® Shadow Rock 3 kaum zu hören. Zum Einsatz kommt ein entkoppelter Shadow-Wings-2-Lüfter mit 120 mm Durchmesser und luftstromoptimierten Rotorblättern. Die verhindern Turbulenzen und halten den Geräuschpegel selbst bei hohen Drehzahlen niedrig. Dank PMW-Anschluss können Sie die Lüfterkurve anpassen und so das optimale Gleichgewicht aus Drehzahl und Kühlleistung für Ihr System finden.
Ob AMD- oder Intel®-Sockel - die Montage des be quiet!® Shadow Rock 3 erfolgt unkompliziert von oben auf das Mainboard. Ein passender Schraubendreher für die Installation liegt dem CPU-Kühler bei. Um die Kompatibilität müssen Sie sich keine Sorgen machen: Dank des asymmetrischen Designs bietet der Lüfter genug Freiraum für die Speicherbänke und passt deshalb auf nahezu jede Hauptplatine.
Aktionen und wichtige Informationen
Hersteller des Jahres 2023 Kühlung Luft
Weitere InfosTechnische Daten
Allgemein: | |
---|---|
Modell: | Shadow Rock 3 |
für folgende Sockel geeignet: | 1150, 1151, 1155, 1200, 1700, 2011, 2011-3, 2066, AM4, AM5 |
Bauart: | Tower Kühler |
Lüfter vorhanden: | Ja |
Lüfter dB(A): | 24.5 dB(A) |
Lüfter U/min: | 1600 U/min |
Lüfteranschluss: | 4-pin PWM |
Länge: | 121 mm |
Breite: | 131 mm |
Höhe: | 163 mm |
Hinweis: Für die Richtigkeit und Vollständigkeit der hier aufgeführten Daten wird keine Haftung übernommen.
Artikelbewertungen
88 Bewertungen
Sie haben Erfahrungen mit diesem Artikel?
Geben Sie eine Bewertung abReklamationsquote: 0,07%
It turns out that this mid-range cooler works pretty well.
Even under a 100% work load (compiling a large project), the temperature stabilizes at 80 degree an all the cores reach the maximum boost speed. Also, the noise is almost not noticeable.
There are two issues however:
- they used some bad glue on the protection film under the heat sink. I got a lot of leftover on the contact surface after the film was removed. Have spent a lot of effort to clean the surface.
- the fin of the head sink is sharp and can cut fingers. Have to wear gloves to hold it.
Passt auch für die neuen 1700er Sockel aber vorsicht. Nicht immer ist das richtige Mounting Kit dabei. Z.B. Fehlte bei mir das für den 1700 er Sockel. Bekommt man aber nach Beantragung kostenlos von be quiet! nachgeschickt und der Prozess ging wirklcih zügig.
In meinen Augen hat der Lüfter nur eine Schwachstelle und das sind die Ausmaße. Klar kühlt er gut wenn er groß ist aber bei mir hat er kaum ins Gehäuße gepasst. Liegt quasi fast an der Scheibe an. Wer also vom Board bis zur Außenwand weniger als 18 cm tiefe hat, sollte eher zu einem anderen greifen.
cons: the fins in this particular model are not stacks densely compered to some other cooler model, so it get easily bent if you are not careful during the mounting process
this however doesn't affect the cooling performance because the individuall fins are substantially bigger
Pros: with sparsely fin stacks, a speciall fan blade to achive high amount of static pressure, is not requiered. The fan, that comes with the cooler, is sufficient enough to do the job an it is very quiet - like the name suggest be queit!
Tips: do not mount the fan before the motherboard is seated in the case, because the fins are so big, you can easily running out of space for a cable management if you mount the cooler on the motherboard, before the MoBo seated in the case.
First seat the cable especially the 4+4 pin/ 8 pin CPU cable (usually on the top left of the motherboard) and other fan/rgb cable then you can mount the cooler on the motherboard.
The package comes with long screwdriver, that suitable to mount the cooler and a little amount of thermal paste, so you dont need to buy extra themal paste, however it is not a pre-applied thermal paste